INNOVACERA® Machinable Ceramic Rod Ø 65 mm
$572.00 – $1,795.00
Description
INNOVACERA® Machinable Glass Ceramic Rod Diameter 65 mm, three length in stock (100 mm, 150 mm, 300 mm), custom length is available. White in color.
Item | Unit | Standard Value | Test Condition | |
Density | g/cm2 | 2.5~2.8 | 4°C Archimedes | |
Porosity | ≤0.08 | |||
Water absorption | ≤0.04 | ASTMC-373 | ||
Volume Resistivity | Ω·cm | ≥1014 | 25°C | ASTMD-657 |
≥107 | 500°C | |||
Magnetic susceptibility | ≤1.2×10-6 | 25°C 10kHz | ||
Dielectric constant | 6~7 | ASTMD-150 | ||
Dielectric strength AC or DC |
KV/mm |
≥15 |
||
Thermal expansion | in/in·°C | ≤94×10-7 | Keep in 400°C | |
≤123×10-7 | Keep in 800°C | |||
Thermal conductivity | W/m·K | ≥1.7 | 25°C | GJB1201 |
Continuous operating temperature |
°C |
850°C |
||
Maximum using temperature |
°C |
1000°C |
||
Flexural strength | MPa | ≥108 | GB6569-86 | |
Compressive strength | MPa | ≥491 | GB8489-93 | |
Impact toughness | KJ/m2 | ≥2.45 | GB/T14389-93 | |
Modulus of rupture | bf/in2 | 15000 | 25°C | ASTMC-158 |
Knoop hardness | KN/mm2 | 1.76~3.43 | 25°C,100g | GJB56A-95 |
Acid proof | mg/m2 | 87 | 5% HCl, 24h, 95°C | |
HF Proof | mg/m2 | 5% HF, 24h, 95°C | ||
Alkali proof | mg/m2 | 5% NaOH, 24h, 95°C |
Used environments:
MGC Machinable Glass Ceramic has a continuous use temperature of 800°C. Its coefficient of thermal expansion readily matches most metals and sealing glasses. It is nonwetting, exhibits zero porosity, and unlike ductile materials, won’t deform. It is an excellent insulator at high voltages, various frequencies and high temperatures. And when properly baked out, it won’t outgas in vacuum environments.
Machining
MGC Machining tolerances are surprisingly tight, up to .0005″. It can be machined to a surface finish of less than 20?in. and polished to a smoothness of 0.5µ. Configurations are limited only by available equipment and the experience of the machinist.
Sealing, Joining and Metalizing
MGC can also be joined or sealed – both to itself and to other materials. – in a number of ways: metalized parts can be soldered together and brazing has proven an effective method of joining the material to various metals; epoxy produces a strong joint, and sealing glass creates a vacuum tight seal. Even a straightforward mechanical joint is possible. It can be thick film metalized using metal inks, or thin film metalized by sputtering.
Key Benefits
Is Machinable with ordinary metal working tools Withstands High Temperature, up to 800°C Holds Tight Tolerances, up to .0005″
Applications:
Electrical or Thermal Insulator Structural Components Semiconductor Processing
Electrical and Opto-Electronic Equipment Many Other Uses
Additional information
Length | 100 mm, 150 mm, 300 mm |
---|
Reviews
There are no reviews yet.